Homelab

The loft at night, after the fan curves

The NAS fans follow the disk temperature now instead of running flat out from 40 °C. Ten seconds of the loft at 23:00 are below.

0:00
/0:06
The rack at night. Only the switch blinks.

Since the August heat the NAS fans ran at full speed from 40 °C, which in practice meant all day, and you could hear them in the bedroom below. They follow the disk temperature now: slow at 38 °C, full at 46 °C. On an October night the loft is below 15 °C and they barely turn.

fancontrol on the NAS

The drivetemp kernel module makes each disk’s temperature a hwmon sensor, so fancontrol can follow it like any other.

INTERVAL=10
FCTEMPS=hwmon2/pwm2=hwmon3/temp1_input
FCFANS=hwmon2/pwm2=hwmon2/fan2_input
MINTEMP=hwmon2/pwm2=38
MAXTEMP=hwmon2/pwm2=46
MINSTART=hwmon2/pwm2=80
MINSTOP=hwmon2/pwm2=40

The mini PCs

The three nodes have a fan curve in their firmware settings. Mine starts the fan at 50 °C. At idle they sit at 41 to 44 °C, so the fans stand still most of the night.

What it sounds like

audio-thumbnail
The loft at 23:00, recorded at the hatch
0:00
/10

What is left is the switch fan and the UPS. The phone app says 33 dB(A) at the hatch, down from 41. Trust the difference more than the numbers.

Comments

Buy Logbuch